Table of Contents
Advertisement
The values in the System Configuration are the basic hardware settings of your
system. You have to change some of them if you add or remove any system
component.
CAUTION:
Press the key combination Ctrl-Alt-Esc to enter the BIOS Utility. The Setup
main menu appears:
= Move Highlight Bar,
NOTE:
5-1 Owner's Handbook
Close all open files and leave your application program
before entering Setup. You cannot exit back into an
application. The system automatically reboots when
you leave Setup.
BIOS Utility
System Configuration
System Security
The BIOS version of the system depends on the CPU
installed. The following sections discuss the 486 and
Pentium versions separately.
= Select,
Esc = Exit
Advertisement
Table of Contents
