Table of Contents
Advertisement
Advanced System Configuration
SCSI I/O ROM Mapping --------------------------------------- [0D0000H]
Memory Block Configuration
Block Size --------------------------------------------------- [64 KB]
Starting Address (A31-A16) ----------------------------- [0000000000000000]
Reserved For ----------------------------------------------- [Noncacheable]
= Move Highlight Bar, = Change Setting, PgDn/PgUp = Move Screen
F9 = Default Setting, F10 = Bootable Setting, F1 = Help, Esc = Exit
Most of the parameters on the preceding screens are the same as those in the
486 version, but some of them have different settings. Refer to section 5.3 for
the descriptions of the similar parameters.
The following sub-sections describe the parameters exclusive to the Pentium
version.
Cache Read Cycle
This parameter sets the length of the cache read cycle. The lower the setting,
the shorter is the read cycle. When the setting is higher, the cache read delay
is longer but the system is more stable.
Cache Write Cycle
This parameter sets the length of the cache write cycle. The lower the setting,
the shorter is the write cycle. When the setting is higher, the cache write delay
is longer but the system is more stable.
Memory Block Configuration
The sub-items under this parameter specify the size and location in the system
memory that is reserved for caching.
5-1 Owner's Handbook
Page 2
Advertisement
Table of Contents
