Jumper Settings; System Board Jumper Settings - Mitsubishi Electric APRICOT FT//EX User Manual

2.5

Jumper Settings

You have to change jumper settings on the system board when you upgrade
the CPU or when you want to reconfigure the system.
Follow these steps to change a jumper setting:
1. Pull out the jumper cap from the jumper.
2. Position the jumper cap over the two pins for the desired setting.
3. Gently press the cap onto the pins.
Figure 2-3 shows the locations of the jumpers on the system board.
Figure 2-3

System Board Jumper Settings

2-10 Owner's Handbook