Configuring An Isa Option Without A Cfg File; Solving Resource Conflicts - Mitsubishi Electric APRICOT FT//EX User Manual

6.4.3 Configuring an ISA Option Without a CFG
File
.
Select CONFIGURE COMPUTER
.
If a printer is attached to your system, print the resources used by the
entire system with this selection:
System
.
Without a printer, select
View—> Resources
and write down the resources used by the system
.
Set jumpers/switches on the ISA board. Make sure that the board does
not conflict with the system resources currently in use.
6.5

Solving Resource Conflicts

If the system uses the resources needed by an ISA option, you have to release
those resources and reallocate other resources to the system.
.
Make the system use other resources by selecting
Resource
or
.
System —> Print
Select
.
To see how to change the switch and jumper settings, select
Switch
and jumper settings. Note down this information.
.
Exit from the utility.
.
Turn off the system and set the jumpers and switches.
Edit —> Lock
If you have used
all resources available to the ECU.
.
Edit —> Unlock
Select
6-18 Owner's Handbook
—> Print
Change Function
to print a list of the resources.
, you need to unlock the configuration to make
.
ADVANCED METHOD.
.
Edit —> Change
View —>