Table of Contents
Advertisement
Starting the Utility
To run the utility, type the following command followed by Enter. (Items in
brackets are optional and only the information within the brackets is entered.)
[d:][path]SD[/B][/H][/K][/M][/A]
The parameters after the path are explained as follows:
/B
BIOS video mode
This parameter causes all screens to be displayed using BIOS Int 10H
calls. Use this parameter on computers with non-standard displays. The
default mode is to write directly to video memory.
/H
High resolution display
If you have an EGA monitor, the utility appears in 43-line mode. If you
have a VGA monitor, the utility appears in 50-line mode. If you do not
enter this parameter, your screen displays 25 lines.
/M Monochrome display
This parameter causes the utility to display the screens in black and
white.
/K
Keyboard only mode
If you use this parameter, the computer will not support the use of a
mouse device even if one is present. The default is to support a mouse if
its driver is loaded in memory.
/A
Expanded mode
This mode offers an expanded set of menus with additional functionality.
This mode may also be activated by pressing Ctrl-A instead of Enter
when the "Welcome" screen appears.
When the utility begins, a logo screen appears. Press any key to display a
"Welcome" screen. To leave the "Welcome" screen and display the main
menu press Enter.
6-20 Owner's Handbook
Advertisement
Table of Contents
