System Housing; Getting Started; Selecting A Site - Mitsubishi Electric APRICOT FT//EX User Manual

System Housing

This chapter describes the system housing features and the additional
components that can be installed. It also has instructions on installing and
removing these components.
1.1

Getting Started

The preinstallation process involves the following:
.

Selecting a site

.
Unpacking the components
.
Positioning the system
.
Moving the System
1.1.1 Selecting a Site
Consider the following when selecting a site for the system:
1. Find a place that is comfortable for you. Avoid dusty areas of extreme
temperature and humidity.
2. Cable paths should not run near equipment that might cause
electromagnetic or frequency interference such as radio transmitters,
television sets, copying machines, heaters, or air conditioners.
3. Find a location close to an electrical outlet. Avoid using extension cords.
4. Leave enough space around the system for normal air circulation.
C h a p t e r
System Housing 1-1
1