Configuring The Computer - Mitsubishi Electric APRICOT FT//EX User Manual

This selection contains the following submenu:
Copy configuration (CFG) files
Configure computer - basic method
Configure computer - advanced method
Return to the main menu
The options in this submenu are discussed in the following sections.
This selection allows you to set your computer date and time. Once you set
the date and time, your computer will keep track of it, even when the power is
turned off.
This selection exits the utility. The system will reboot. If you do not have an
operating system installed on your fixed disk, replace the system utilities
diskette in the diskette drive with an operating system diskette.
6.3.3

Configuring the Computer

This section describes the first two selections in the submenu under the
CONFIGURE COMPUTER selection in the main menu.
When you configure your system with the ECU, you would basically do the
following:
1. Before you add boards or options, copy the configuration (CFG) file
(contained in a diskette provided by the board manufacturer) to the ECU.
.
Select CONFIGURE COMPUTER on the main menu.
6-4 Owner's Handbook
CONFIGURE COMPUTER
Configure Computer
SET DATE AND TIME
EXIT FROM THIS UTILITY