i3 International Ax45RM series User Manual page 9

1
1. I/O connectors reserved for future use.
2. AC 24V Port. Connect AC 24V power supply.
3. RJ45 Ethernet Connector / PoE. Connect RJ45 network cable for Ethernet/Internet
connectivity. PoE (Power over Ethernet) is supported.
Caution: Do not apply power until the camera is properly and securely mounted.
4. Orange LED. Flashing orange LED indicates data transmission between camera
and the Internet.
5. Green LED. Solid green LED indicates a current live connection.
4.3 3-Axis lens position adjustment
Pan Adjustment
Rotate the lens base (max 354°) until satisfied with the field of view.
Note: Over-rotation past 354° will cause internal cables to become damaged,
disconnected, or twisted.
Horizontal Rotation
Firmly grasp the camera lens assembly and rotate counter-clockwise / clockwise (max
354°) until satisfied with the field of view.
Note: Over-rotation past 354° will cause internal cables to become damaged,
disconnected, or twisted.
Tilt Adjustment
Tilt the camera lens until satisfied with the field of view.
Once the desired view has been achieved, replace the camera liner until it snaps into
place.
i3-TRNG-CAMS-Ax45RM_65RM-UM.indd
4 5
2
3
Reserved Reserved
GND
Pan Adjustment
Tilt Adjustment
10°~90°
Horizontal Rotation
±177°
9
Reserved Reserved
GND AO
COM GND
±177°
Rev. 161107
AI