i3 International Ax45RM series User Manual page 25

•
Frame Rate: Available frame rate settings: 1, 3, 7.5, 10, 15, 30 fps or choose
Custom and enter preferred frame rate manually.
•
VBR Max bit rate / CBR bit rate (for H264 codec): Set the video bit rate between
64-20000 kbit/s. The default value is dependent on the Resolution and Frame
Rate.
•
H264 GOP (I-Frame Interval): (for H264 codec): Provide a value from 1-60. The
default value will automatically the Frame Rate.
•
H264 Rate Control Mode: (for H264 codec): VBR (Variable Bit Rate) or CBR
(Constant Bit Rate).
»
VBR (Variable Bit Rate) (recommended): This setting will produce a variable
bit rate video stream, however the video quality will remain constant resulting
in high quality video images. Network infrastructure must be able to provide
the set bandwidth to account for bit rate variations.
»
CBR (Constant Bit Rate): This setting will produce a constant bit rate video
stream at the cost of video quality. The quality may deteriorate considerably
when motion is detected. This setting is beneficial for installations with
limited bandwidth.
•
Quality (for MJPEG codec): Set to video Low, Mid or High for MJPEG compression.
Stream 2 (Secondary Streaming) / Stream 3 (Third Streaming):
Note: Secondary streaming is used for Live Viewing, Remote Streaming (VPC, SRX-Pro
Remote, SRX-Pro Web) and in split-screen display mode. Third streaming can be set to
MJPEG compression and used for camera edge recording.
•
Video Codec: Set the compression mode to MJPEG or H264.
•
Resolution: Set the resolution of the recorded video to: 800x600, 720x480,
360x240 (Stream 2) / 800x600, 704x480, 352x240 (Stream 3).
To disable the stream, select none.
Note: i3 Recommends keeping the default factory streaming settings. You may
choose to enable Third stream (MJPEG) for camera edge recording.
•
Frame Rate: Set the frame rate for the recording. (Same as Stream 1).
•
VBR Max bit rate (for H264 codec) / CBR bit rate: (Same as Stream 1).
•
H264 GOP (I-Frame Interval): (Same as Stream 1).
•
H264 Rate Control Mode: (Same as Stream 1).
•
Quality (for MJPEG codec): (Same as Stream 1).
Advance Settings:
•
White Balance: Set White Balance mode to ATW (Auto Tracing White Balance),
Auto or Manual.
»
Auto: Automatically controls color temperature ranging from 2500°K to
10000°K
»
ATW (Auto Tracing White Balance): continuously adjusts the camera color
balance in accordance with any change in color temperature.
»
Manual: Set R (Red) Gain and B (Blue) Gain values manually between 0 and
511, according to your preference.
i3-TRNG-CAMS-Ax45RM_65RM-UM.indd
25
Rev. 161107