i3 International Ax45RM series User Manual page 42

frequency for Snapshot or Video clip recording and Audio Output activation, in
conjunction with the custom arming schedule.
Store to SD Card:
•
Snapshot: Check to save a *.jpg snapshot to the microSD after each Trigger
Interval.
•
Record: Check to save a *.mp4 video clip to the microSD after each Trigger
Interval.
Audio:
•
Audio Out: Enable Audio Out to play a selected alarm sound from the audio
device connected to Audio Out port on the camera after each Trigger Interval.
•
Audio Sound: Select one of 10 available alarm sounds to play after each Trigger
Interval. Audio sounds are configured under Alarm setup tab.
Condition Settings for Sending E-mail by SCHEDULE:
Note: SMTP settings must be configured for this feature.
•
Enable: Check to Enable scheduled E-mail after each Trigger Interval. Snapshot
image will be added to the email. Note that at least one MJPEG stream must be
enabled for this function in Video setup tab.
•
Subject: Enter the E-mail subject.
•
Message: Enter E-mail body message.
Schedule:
•
Configure arming schedule. Enable days of the week when linked actions in this tab
will be active (enabled). Set the active time period for each enabled day by using
the drop-down menus for Start and End Times to select the hours and minutes,
respectively. By default, Schedule arming schedule is set to stay active 24/7.
After making any setting adjustments, remember to click the Save button to
save any changes made.
6.9.3 Arming Schedule Setting > AUDIO
Detected Audio Input events can trigger a video clip or snapshot recording to the
microSD card. On-screen display and email notifications are also available.
An example of an Audio Input device would be a microphone connected to the Audio IN
port on the camera. Each time the camera senses the Audio Input signal coming from
the connected Audio Input device, it will treat it as an Audio IN event.
Tip: Alarm OUT (Control) can be triggered in response to the detected Audio IN event as
long as Alarm Out device is correctly connected to the camera, Digital Output Settings
are configured in the Alarm setup tab and the "Audio" checkbox is enabled under Active
Digital Output for Events section.
Note: All linked actions configured in this setup tab are subject to arming schedule.
i3-TRNG-CAMS-Ax45RM_65RM-UM.indd
42
Rev. 161107