i3 International Ax45RM Quick Start Manual

1.3/3MP Infrared Outdoor IP Dome Camera w/ Motorized Lens

SAFETY

When installing your Ax45RM/Ax65RM camera be sure to avoid:
• excessive heat, such as direct sunlight or heating appliances
• contaminants such as dust and smoke
• strong magnetic fields
• moisture and humidity
• areas with mechanical vibrations
• fluorescent lamps or objects that reflect light and unstable light sources
• temperatures below -50° C or -58° F and above 50° C or 122° F
For more details on installation / operation, please refer to the CD provided.
•

POWER SUPPLY

Ensure the supplied voltage meets the power consumption requirements of this camera
before powering the camera on. Incorrect voltage may cause irreparable damage to the
video camera and will effectively void the camera warranty.

CLEANING

• For maximum optical clarity, the camera dome or lens must remain clean. Use a soft,
dry cloth to remove finger prints or dust from the dome cover.
• Use a blower to remove dust from the lens.
• Do not use volatile solvents such as alcohol, benzene, or thinners, as they may dam-
age the surface finishes.

SERVICING

To avoid electrical shock and to preserve the product warranty, DO NOT disasemble the
camera. Refer servicing to qualified personnel only.

PACKAGE CONTENTS

Ensure that the items received match those listed on the order form and the packing slip.
In addition to this manual and a fully assembled camera, the dome camera packing box
includes:
1. User Manual and Annexxus Configuration Tool CD x1
2. Surface Mount template x1
3. Rubber gasket x1. Use in all outdoor installations.
4. Security torx bit x1
5. Flush Mount template x1
6. Round Head Screw (Tapping Type) with O-ring x4
7. Plastic Anchor x4
8. Long Screws for Flush Mount w/Back Box installations x3
9. Standard RJ45 Connector x2
10. 8-pin green terminal block x1
Lens Direction
User Guide
GUIDE PATTERN
IP Finder
1
O-ring
GUIDE PATTERN
6
CUT LINE
5
CAMERA OUTLINE
i3-TRNG-CAMS-Ax45RM-65RM-QuickGuide.indd
.
2 3
9
7
10
8

CAMERA PARTS AND DEFINITIONS

5. Inner liner / Shroud
6. IR board
7. Dome bubble housing / Dome cover
4
8. Screws securing the dome bubble housing to camera module (x3, silver)
9. Lexan bubble
10. 3/4" Top conduit hole. During installation, sealant must be used to maintain the
IP66 status.
11. 3/4" Side conduit hole. During installation, sealant must be used to maintain the
IP66 status.
12. Reset/Default pin-hole button. Press for 1 second to reboot the camera. Press for
6 seconds to restore camera settings to factory defaults.
13. Micro SD Card slot for on-camera video storage. (microSD card sold separately)
14. Mini USB port. Use mini USB to RJ-45 adaptor for real-live video preview during
installation to adjust camera's field-of-view.

Quick Start Guide

Ax45RM/Ax65RM
12
13
14
1. Camera's back box
2. Screws attaching camera module to the
back box
(x3, silver)
3. Camera module / second housing
4. Tilt bracket with locking screws
Rev. 151126