6.5 Alarm (edge)
In the Alarm setup tab, configure Alarm In and Alarm Out devices as well as Audio Out
sounds. Alarm In and Alarm Out devices must be correctly connected to the camera
during the installation stage.
Note: These alarm features are not related to SRX-Pro Server control/sensor settings
and function independently.
Audio In Audio Out Alarm Out Alarm In
4
5
1
2
3
GND
GND
AO
AI
Au/I
Au/O
COM
GND
Digital Input Settings (Alarm In, Sensor):
Digital Input: Set to Enabled to use the Alarm In/Sensor device connected to the
camera's Alarm In connector.
Input Active Type: Set the enabled Alarm In/Sensor
as Normally Open (NO) or Normally Closed (NC),
depending on the device specifications.
Digital Output Settings (Alarm Out, Control):
Digital Output: Set to Enabled to use the Alarm
Out/Control device connected to the camera's
Alarm Out connector.
Output Active Type: Set the enabled Alarm
Out/Control as Normally Open (NO) or
Normally Closed (NC), depending on the device
specifications.
Rev. 161107
i3-TRNG-CAMS-Ax45RM_65RM-UM.indd
30