Using the Program
86
Advance Setting
The following explains how to configure the functions necessary for device operation.
Item
LGAP setting
Peak/Demand set
Set the operation
mode
Temperature
difference
for Setback/
AutoChangeOver
Update S/W
DB backup
Recovery DB
Master: ACP BACnet must be set to only master.
Slave: Not used.
Peak Control: You can use the peak control feature in the auto
logic menu.
Demand Control: You can use the demand control feature in
the auto logic menu.
Priority Control: In Peak/Demand Control menu, control the
devices based on the priority of the group.
Outdoor Unit Capacity Control: In the Peak/Demand
Control menu, control the outdoor capacity rate per unit.
[+]/[-] button to select the temperature gap.
Software upgrade using a USB memory stick.
Complete upgrade and restart the system.
Backup the DB onto a USB memory stick.
Use the DB stored on the USB memory stick to restore the system.
Description