Download  Print this page

LG REGX-XOXXA Reference Manual

Hide thumbs
   

Advertisement

* LG Innotek REGX-XOXXA (Electronic Shelf Label Gateway)
This is the reference manual for ESL Gateway handling.
After fully understanding this manual, use the Gateway in proper way
◆ Read all instructions before performing any work.
◆ Installation must be done completely after fully understanding [Safety Rules]
◆ Installer should give this Instruction to actual user after fully understanding it.
◆ Please, keep this manual in a handy place. When reinstalling or repairing, give this manual to
new user or contractor
1. Safety Rules
◆ In case of mishandling, risk sign arises, Meaning of the sign is explained in below table.
◆ In this guide, the safety instruction levels are classified into "WARNING" and "CAUTION".
CAUTION - Indicates incorrect handling that may cause hazardous conditions, resulting in slight
injury or physical damage.
WARNING - Indicates incorrect handling that may cause hazardous conditions, resulting in death
or severe injury
Only use rated voltage. (Using lower/higher
voltage than rated voltage may cause fire)
Do not install this equipment where using
combustible gas leak. (It may cause fire)
Do not use excessive pressure on equipment to
remove. (It may cause damage to ceiling
material)
Shut down your equipment immediately if it
produces smoke, a strange odor, or unusual
noise.
! CAUTION
Do not touch this equipment or cable with wet
hands. (It may cause electrocution)
Do not locate it in high humidity environment.
(Condensation or Rust in the equipment cause
electrocution or fire)
When you have minor trouble, please refer to
"Trouble Shooting" section first
! WARNING
Keep your device away from radiators and heat
sources. (It may cause fire)

Advertisement

Table of Contents
loading

  Summary of Contents for LG REGX-XOXXA

  • Page 1 * LG Innotek REGX-XOXXA (Electronic Shelf Label Gateway) This is the reference manual for ESL Gateway handling. After fully understanding this manual, use the Gateway in proper way ◆ Read all instructions before performing any work. ◆ Installation must be done completely after fully understanding [Safety Rules] ◆...
  • Page 2 DC 12V / 1A or above, 3.5∅ DC Power Jack POE hub (Using POE) More 12Watts Max Port Output Screw driver 3. Contents of pack - REGX-XOXXA (ESL Gateway) 1ea - User’s Manual (this manual) 1ea - Bracket 1ea (Optional) - Screw 2ea (Optional) 4. Installation (Using Spring) ①...
  • Page 3 ! WARRING – Do not Install on the insulating material (It may cause fire) ③ Connect (LAN Cable/Power Cable) Wire There are 2 cases for powering ESL Gateway Case 1 : Using POE (Power Over Ethernet) Case 2 : Using DC Adapter...
  • Page 4 Do not connect both POE cable and DC cable to ESL Gateway ! WARRING – (It may cause break down or fire) ④ Insert Gateway into the Hole Pushing 2 springs in direction of arrow paint, put the ESL Gateway into the ceiling. ⑤...
  • Page 5 ! CAUTION – Do not use excessive pressure on equipment to remove. (It may cause damage to ceiling material) 5-1. Using Bracket If you cannot make a hole on the ceiling, use the bracket in the package to install the ESL Gateway.
  • Page 6 Associated side view is as below: 5. Specifications...
  • Page 7 6. LED Operating LED on the ESL Gateway indicates equipment status. Before operating, check this LED Color. After Booting and all OS loaded, red power LED turn is Normal Status. LED Operating Table Explanation Color Scene Active Communication with PDA or WLAN Green article matching device...
  • Page 8 8. Warranty Under normal use condition, products resulting from its own failures in the warranty period will be free maintenance. Warranty Terms as following: a) Charge-free maintenance of the product is one year. We can repair it for free during the guarantee period (Damages not caused by misuse).
  • Page 9: Information To The User

    9. Regulation Information INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.