Using the Program
88
Set the operation mode
You can configure the operation type as follows.
1.
In the main menu, click the [Environment] menu icon.
2.
In the Settings list, click Advance Setting.
3.
In the detailed settings list, click Set the operation mode.
4.
Click an operation type you want.
Temperature difference for Setback/AutoChangeOver
You can configure the temperature gap for auto changeover operation.
1.
In the main menu, click the [Environment] menu icon.
2.
In the Settings list, click Advance Setting.
3.
In the detailed settings list, click Temperature difference for Setback/AutoChangeOver.
4.
[+]/[-] button to select a temperature gap you want and [Apply] button.