Installing ACP BACnet
126
2.
Press [SET] button of the ACP BACnet.
3.
Select [Function] menu, and press [SET] button.
4.
Select [DB back up] menu, and press [SET] button again.
5.
Select [USB] or [SD card], and press [SET] button.
6.
After completing backup, remove USB memory.
Caution
Before data backup is completed, turning off the power of the ACP BACnet or removing USB
memory or SD card may cause severe disorder of the ACP BACnet.
Network Info
Contents
>
Function
Click
Register FD
SET
button
[Function]
S/W update
>
DB back up
Click
DB recover
SET
button
[DB back up]
>
USB
SD card
Click
SET
button
Remove USB
memory or SD card
[Completed]
Remove USB
or SD card