LG PQNFB17C1 Installation And User Manual page 126

Installing ACP BACnet
114
Using dynamic IP using DHCP
For user to use the functions of the ACP BACnet through the web, a unique IP address may be
assigned to the ACP BACnet or dynamic IP setting may be used.
The next is how to set dynamic IP address.
Please proceed according to the order.
1.
Press [SET] button of the ACP BACnet. The following menu screen will be displayed.
If you press [SET] button again, [Network Info] setting screen will be displayed.
While DHCP is selected, if you press [SET] button, you can input whether to use DHCP
function.
2.
pressed, DHCP is set for no-use.
3.
To use dynamic IP, set to use DHCP function.
Caution
If dynamic IP type is used, the IP in use is returned by DHCP server and may not be able
to access the ACP BACnet.
In such case, you can check the newly set IP address in the front LCD of the ACP BACnet.
If you input the ACP BACnet IP address in the web browser, you can run the ACP BACnet
program again.
> Network Info
Contents
Function
Click SET
Register FD
button Click
four times
[Network Info]
MC
> DHCP NO
Click SET
button
Not(0) / USE(1) : 0
Not(0) / USE(1) : 1
Example of setting to use DHCP function
000000:00:00:00
[Set DHCP]
[Set DHCP]
1 1