RS-485 data logging
If ACP BACnet RS-485 data logging is necessary, it must be carried out by the specialized service
technician.
Data logging can be done with SD card.
Proceed in the following order.
1.
Insert SD card into the ACP BACnet. (Refer to data backup)
2.
Press [SET] button of the ACP BACnet.
3.
Select [Function] menu, and press [SET] button.
4.
Select [Data Logging] menu, and press [SET] button again.
5.
Select whether to set data logging.
Network Info
Contents
Function
>
Register FD
Click
SET
button
[Function]
S/W update
DB back up
>
DB recover
Click down
[Function]
>
Data Logging
Click
SET
button
[Set Data Logging]
Not(0)/USE(1) : 0
Installing ACP BACnet
129