Taylor-Dunn C0-014-32 Operation, T Roubleshooting And Replacement Parts Manual page 41

19. Adjust the alignment bracket adjusting bolt(s) (10)
to 0.050-0.100" away from the brake band and
tighten the jam nuts (12).
20. Loosen the brake band adjusting bolt (4).
21. Connect the brake cable or linkage to the brake
arm and adjust the cable so that the brake arm is
1/4" away from the chain case when the parking
brake is off.
Maintenance, Service, and Repair
22. Adjust the brake band adjusting bolt (4) so that
there is no brake drag when the brake is off. It
may be necessary to readjust the alignment
bracket adjusting bolt(s) (10) for optimum brake
alignment and operation.
23. Tighten the brake band bolt jam nut (7).
24. Set the park brake.
25. Reconnect the main positive and negative cables
at the batteries.
26. Remove the blocks from behind the wheels.
27. Release the park brake and test drive the vehicle.
Brakes
Page 5