Calibration - Keithley 595 Instruction Manual

OPERATION
Table 3-1. Front Panel Programs
l-r-
I* $ Frequency
Powers Line frequency setting. Fr=5OHz, Fr=60Hz
7R/
*$ Calibration
Allows calibration of instrument.
FI I k
] Filter
Selects ffiter O-3, see section 3.4.3
Erg,
1 Trigger
lZELZ3 Ana1og Output
Trigger mode: O=continuous, l=one shot
C, I voltage at rear panel ANALOG OUTPUT binding posts.
I
rfHP 1 Corrected Capacitance Corrects capacitance readings for error currents. l=correction on,
O=correction off. See Section 5.34 before using.
IEFt
* IEEE-488 Address
IEEE-488 Address Selection Program.
l-l IclP
) * Display Sets numeric or alpha exponent.
[ L1 H I ?]tYHIGH
Plotter Y-axis high limit.
y J o-r'It YLOW
Plotter Y-axis low limit.
I-,
It Grid Sets and plots grid for IEEE-488 data graphing.
* Stored in permanent memory.
t Appears in MENU only when address code 42, 43 is selected.
S~Appears in MENU only when calibration is enabled.
3-7