Erepacking For Shpment; Warranly Information; Accessories - Keithley 595 Instruction Manual

The following items are included with every Model 595
shipment:
Model 595 Qua&static CV Meter
Model 595 Instruction Manual
Model 4801 Low Noise Coax Cables with BNC Connectors
(two)
Additional accessories as ordered.
If an additional instruction manual is required, order the
manual package (Keithley Part Number 595-901-00). The
memud package includes an instruction manual and all per-
tinent addenda.
1.6 REPACKING FOR SHIPMENT
Before shipping the instrument should be carefully packed
in its original packing material.
If the instrument is to be returned to Keithley Instruments
for rep'air or calibration, include the following:
Write XI'ENTION REPAIR DEPARTMENT on the ship-
ping label.
Include the warranty status of the instrument.
Complete the service form at the back of this manual.
1.7 WARRANTY INFORMATION
Warranty information for your Model 595 may be found in-
side the front cover of this manual. Should you need to
use the warranty, contact your Keithley representative or
the factory for information on obtaining warranty service.
Keithky Jhslmments, Inc. maintains service facilities in the
United States, West G ermany, Great Britain, France, the
Netherlands, Switzerland, and Austria. Information con-
cerning the operation, application, or service of your in-
strument may be obtained from the applications engineer
at any of these locations.
1.6 ACCESSORIES
The following accessories are available to enhance Model
595 capabilities.
Model 1019A and 1019s Rack Mounting Kits-The Model
lOl9A is a fixed or stationary rack mounting kit with two
front panels provided to enable either single or dual side-
by-side mounting of the Model 595 or other similar Keithley
instrument. The Model 10195 is a similar rack mounting
kit with a sliding mount configuration.
Model 4801 Coax Inp~ut Cables-The Model 48M, two of
which are included with every Model 595 shipment, are
low noise coaxial cables, 1.2m (48 in.) in length, with male
BNC connectors.
Model 4803 Low Noise Cable Kit-Kit includes 50 ft. of low
noise coaxial cable, 10 male BNC connectors, and five
female BNC chassis-mount connectors.
Model 6104 Test Shield-Model 6104 facilitates measure-
ments with 2- or3terminal guarded connections. Provides
electrostatic shielding, high isolation resistance, and easy
connection to Model 595. Clips plug into banana jacks,
allowing modified connections. Shield has BNC connec-
tor on one side, binding posts on the other. Useful when
making current measurements with external voltage source.
Model 6105 Resistivity Chamber-Guarded test future for
measuring volume and surface resistivitles. Assures good
elechostatic shielding and high insulation resistance.
Model 7007 Shielded IEEE488 Cables-The Model 7007
cables are designed to connect the Model 595 to the
IEEE488 bus and are available in two versions. The Model
7007-1 is lrn (3.3 ft.) in length, and Model 700%2 is 2m (6:6
ft.) jn length. Cables have shielded connectors on each end.
Model 7051 BNC-to-BNC Cables-Available in two lengths.
Model 7051-2 is 1.8m (2 ft.) in length, and Model 7051-S is
15m (5 ft.) in length.
l-2