Model595Rearpanel - Keithley 595 Instruction Manual

GEl-ilNG STARTED
2.5.2 Model 595 Rear Panel
Figure 2-2. Model 595 Rear Panel
The rear pand of the Model 595 is illustrated in Figure 2-2.
El
7 C, I ANALOG OUTPUT-6way binding posts that correspond to
~~~:~
meter display IC Q/t or Il. Referenced to IEEE common.
AC RECEPTACLE-Connects to three-wire line cord.
protection on the AC power line input.
q .
3 IEEE-488-Connects the instrument fo the IEEE-488 bus. IEEE-488
mterface functions are marked above the connector.
for shields or the LO
q
5 C, I METER INPUT-Tefloninsulated BNC. Inner conductor is input
HI, outer conductor is GUARD.
VOLTAGE SOURCE OUTPUT-Isolated SNC connector. Inner con-
output HI. outer conductor is GUARD. Voltage is sourced
from this wtpuf to bias devices when making current or
capacitance measurements. Referenced to GUARD.
cl
8 V ANALOG OUTPUT--B-way binding posts that correspond to
voltage at which C, Q/t, or I measurement was taken. Referenced
m IEEE common.
q
9 PEN LIFT-Two 5-way binding porn; pen lift and IEEE common. Nor-
mally a TTL high output; TTL low during a staircase waveform.
Minimizes recorder pen blotting.
q
10 MET!3 COMPLETE OUTPUT-Isolated BNC connector provides
negarwe gomg TTL output pulse after a reading is completed.
Referenced to IEEE common.
q
11 EXTERNAL TRIGGER INPUT-Isolated SNC connector. Negative
edge tnggered, TTL level. Referenced to IEEE common.
2-6