Zte ZXR10 5900E Series Configuration Manual page 36

ZXR10 5900E Series Configuration Guide (QoS)
ZXR10(config)#ipv4-access-group interface gei-0/1/1/1 ingress managerA
/*Configuring priority mark*/
ZXR10(config)#pm-qos
ZXR10(config-pm-qos)#priority-mark ipv4-access-list managerA rule-id 10
cos 7 dscp 63
/*Configuring traffic limit*/
ZXR10(config-pm-qos)#traffic-limit-acl ipv4-access-list managerA rule-id
20 cir 10000 cbs 200 ebs 3000 mode blind
/*Configuring traffic statistics*/
ZXR10(config-pm-qos)#traffic-statistics ipv4-access-list managerA rule-id
20 pkt-type all statistics-type packet
ZXR10(config-pm-qos)#exit
ZXR10(config)#
/*Configuring ACL rule*/
ZXR10(config)#ipv4-access-list managerB
ZXR10(config-ipv4-acl)#rule 10 permit tcp any 192.168.4.70 0.0.0.0
ZXR10(config-ipv4-acl)#rule 20 permit ip any 192.168.3.100 0.0.0.0
ZXR10(config-ipv4-acl)#rule permit any
ZXR10(config-ipv4-acl)#exit
/*Binding the interface of network B*/
ZXR10(config)#ipv4-access-group interface gei-0/1/1/2 ingress managerB
/*Configuring priority mark*/
ZXR10(config)#pm-qos
ZXR10(config-pm-qos)#priority-mark ipv4-access-list managerB rule-id 10
cos 7 dscp 63
/*Configuring traffic limit*/
ZXR10(config-pm-qos)#traffic-limit-acl ipv4-access-list managerB rule-id
20 cir 20000 cbs 200 ebs 3000 mode blind
/*Configuring traffic statistics*/
ZXR10(config-pm-qos)#traffic-statistics ipv4-access-list managerB rule-id
20 pkt-type all statistics-type packet
ZXR10(config-pm-qos)#exit
ZXR10(config)#
Configuration Verification
Use the following commands to verify that QoS configuration is correct and valid:
2-14
SJ-20150114102049-008|2015-01-15 (R1.0) ZTE Proprietary and Confidential