Zte ZXR10 5900E Series Configuration Manual page 13

Step Command
1
ZXR10(config-pm-qos)#
><0-7><0-7><0-7><0-7><0-7>
2
ZXR10(config-pm-qos)#
enable | disable }
Parameters in Step 1 are described as follows:
Parameter
<0-7>
<0-7>
<0-7>
<0-7>
<0-7>
<0-7>
<0-7>
<0-7>
Parameters in Step 2 are described as follows:
Parameter
<interface>
{ enable | disable }
Configuring Tail Drop
To configure tail drop, perform the following steps:
Step Command
1
ZXR10(config-pm-qos)#
<0-7><1-255><1-255><1-255>
2
ZXR10(config-pm-qos)#
<0-4>
Parameters in Step 1 are described as follows:
Parameter
<0-4>
<0-7>
<1-255>
SJ-20150114102049-008|2015-01-15 (R1.0)
cos-local-map <0-7><0-7><0-7
trust-cos-lp-map <interface>{
Description
Number of the queue for messages with pri=0.
Number of the queue for messages with pri=1.
Number of the queue for messages with pri=2.
Number of the queue for messages with pri=3.
Number of the queue for messages with pri=4.
Number of the queue for messages with pri=5.
Number of the queue for messages with pri=6 .
Number of the queue for messages with pri=7.
Description
Interface name.
Enables or disables the local priority mapping function.
tail-drop <0-4> queue-id
drop-mode <interface> tail-drop
Description
Session ID. One session can send the tail drop parameters
of multiple queues.
Queue number.
Total drop threshold.
1-7
Chapter 1 Port QoS Configuration
Function
Sets the local priority.
Enables or disables the local
priority.
Function
Sets the tail drop template.
Sets the tail drop.
ZTE Proprietary and Confidential