Zte ZXR10 5900E Series Configuration Manual page 28

ZXR10 5900E Series Configuration Guide (QoS)
Descriptions of the parameters in Step 2:
Parameter
{ipv4-access-list| ipv4-mix|
ipv6-access-list| link-acl|ipv6-mix}<
WORD>
rule-id < 1-2147483644>
cir < 0-100000000> cbs < 0-16000>
eir < 0-32000000> ebs < 0-16000>
ebs < 0-16000>
pir < 0-100000000> pbs < 0-16000>
mode {blind}|{aware}
[drop-yellow]
[forward-red]
[remark-red-dp]{high}|{low}|{medium}
[remark-red-dscp]<0-63>
[remark-yellow-dp]{high}|{low}|{medi
um}
[remark-yellow-dscp]<0-63>
Configuring Hierarchy Meter
To configure hierarchy meter, perform the following steps:
Step Command
1
ZXR10(config)#
2
ZXR10(config-pm-qos)#
cir <0-100000000> cbs <0-16000> mode {band-borrow
}|{band-limit }
SJ-20150114102049-008|2015-01-15 (R1.0)
Description
The type and name for the bound ACL rule.
The number of the ACL rule where this traffic limit takes effect.
Committed Information Rate and Committed Burst Size.
Committed Information Rate and Excess Burst Size. When
these two parameters are configured, it means that the
ModifyTrTCM arithmetic is used. This mode only takes effect
on several line cards, including H2, H3, H5, and S5.
Excess Burst Size. When this parameter is configured, it
means that the SrTCM arithmetic is used.
Peak Information Rate and Peak Burst Size. When these
two parameters are configured, it means that the TrTCM
arithmetic is used.
blind refers to the color-blind mode. aware refers to the
color-aware mode.
Drops yellow packets. The yellow packets are forwarded by
default.
Forwards red packets. The red packets are discarded by
default.
Modifies the drop priority for the red packet. Range: High,
middle, and low.
Modifies the DSCP priority for the red packet. Range: 0-63.
Modifies the drop priority for the yellow packet. Range: High,
middle, and low.
Modifies the DSCP priority for the yellow packet. Range:
0-63.
pm-qos
traffic-macro-flow <WORD>
2-6
Function
Enters pm-qos configuration
mode
Configures macro meter
ZTE Proprietary and Confidential