Zte ZXR10 5900E Series Configuration Manual page 11

Command
ZXR10(config-pm-qos)#
<64-40000000> burst-size <1-4096>
Parameter descriptions are as follows:
Parameter
<interface>
data-limit
<64-40000000>
burst-size
<1-4096>
Configuring Queue Scheduling
To configure queue scheduling, perform the following steps:
Command
ZXR10(config-pm-qos)#
<0-7><1-255>| dwrr<0-7><1-4080>}
Parameter descriptions are as follows:
Parameter
<interface>
{ wrr | dwrr }
<0-7>
<1-255>
<1-4080>
Configuring Default Priority
To configure default priority, perform the following steps:
Command
ZXR10(config-pm-qos)#
Parameter descriptions are as follows:
SJ-20150114102049-008|2015-01-15 (R1.0)
traffic-shape <interface> data-limit
Description
Interface name.
Key word, traffic shaping rate.
Traffic shaping rate value or queue bandwidth threshold (in
Kbps). Interface boards with different models have different
minimum granularity.
For details, refer to the board performance specifications.
Key word, the token bucket capacity.
Token bucket capacity value (Kbits).
queue-mode <interface>{ wrr
Description
Interface name.
Select one from two queue scheduling modes, by default, sp.
Select a queue number.
Select a WRR scheduling factor (weight).
Select a DWRR scheduling factor (weight).
priority <interface><0-7>
1-5
Chapter 1 Port QoS Configuration
Function
Sets traffic shaping.
Function
Sets queue scheduling.
Function
Sets the default priority.
ZTE Proprietary and Confidential