Add Discovery Entry; Remove Discovery Entry - Overland Storage SnapSAN S2000 User Manual

SnapSAN S2000 User Guide

Add Discovery Entry

Click the Add button (or select the Add Discovery Entry option from the tasks list) to
add an appliance, PC, or server to the SAN. The Add Discovery Entry dialog box pops
up for you to enter the IP address.
Entries that you add to the SAN in this way are referred to as static entries, those that
are discovered automatically are referred to as dynamic entries. The IP addresses for
dynamic entries may change over time. Static entries are differentiated from dynamic
entries in the Discovery view by a superscript S next to the address.

Remove Discovery Entry

To remove a static decommissioned appliance, PC, or server from the SAN, select its
entry from the static list, and then click the Remove button (or select the Remove
Discovery Entry option from the tasks list).
NOTE: If you try to remove a node which is physically present in the SAN, it will automatically
10400277-004 07/2011
be discovered again and added back to the list if automatic rediscovery is enabled.
©2010-11 Overland Storage, Inc.
6-4