Overland Storage SnapSAN S2000 User Manual page 49

SnapSAN S2000 User Guide
• Replication (optional licensed feature) – If licensed, select the Replication tab
to configure a replica of the disk.
Click the Create Replica check box to enable replication and then choose a
storage pool for the replica from the drop-down list. The tab shows the
redundancy and speed ratings for the pool you select together with the amount
of free space available and the amount required.
To set up a schedule for updating the replica, select a schedule from the drop-
down list at the bottom. A schedule can be added later, if preferred, using the
Properties & Scheduler view, as described on
further information about managing a replica and using recovery points to
capture the state of the replica at specified times. Data can be restored from the
replica at a recovery point.
NOTE: You cannot select both replication and mirroring for a storage disk.
10400277-004 07/2011
©2010-11 Overland Storage, Inc.
page 5-22, which also contains
5-6