Recovery Point Information; Edit Replicant Volume - Overland Storage SnapSAN S2000 User Manual

SnapSAN S2000 User Guide
The Mapped Targets section shows the name, time stamp, and size of any mapped
targets created from a recovery point. Click the Replica field (light blue text) of a
mapped target to open the
a target (click Map Target) to a replica at a specified recovery point using the
Point Target
Clicking the pool name opens the
There are several actions that you can carry out from this page:
• Edit Replicant – Displays the
disable manual import.
• Delete Replicant – This removes the replicant volume and all the storage
associated with it. Any mapped targets must be removed before the replicant
volume is removed. The
out the remove operation. Before doing this, it is recommended that you break
the association between the replicated volume and the target that is being
replicated. To do this, select the replicant host from the
page. The
Remove action.
• Map Recovery Point – This action enables you to create a mapping from a
recovery point. The
set up the details. This is only visible when a recovery point exists.
• Import Replicant Data – If manual import is selected, the Import Recovery
Point from USB page is shown where replication data can be imported from a
USB device rather than transferred over the network. This option is only visible
when a recovery point exists. See the
exporting replication data.
To manually import data, select the replication data item from Replicant
Import page and click Apply to start the transfer. The
Information

Recovery Point Information

This page displays the details of the replicant recovery point.
10400277-004 07/2011
Recovery Point Information
Mapping.
Pool Information
Delete Replica Volume
Target Replicant Host Information
Recovery Point Target Mapping
page shows the progress of the import.
©2010-11 Overland Storage, Inc.
page from which you can map
page.

Edit Replicant Volume

page is displayed for you to carry
page is displayed. Select the
page is displayed for you to
Target Information
Recovery
page for you to enable or
Target Information
page for details of
Replicant Volume
8-70