Create Replicant Volume - Overland Storage SnapSAN S2000 User Manual

SnapSAN S2000 User Guide

Create Replicant Volume

This page is used to set up a new replicant volume. The page is accessed by clicking
the Add Replicant Volume action item on the
Enter the following:
• Replicator Host – The IP address or domain name of the replicant host. This is
a remote destination where replicas are stored for future recovery.
• Product ID Number – The serial number of the appliance acting as the
replicant host.
• IQN (of Target) – The IQN of the target associated with the volume.
• Manual Import – Causes data transfer to take place from an external drive,
such as a USB drive, rather than over the network (see also
Information" on page
• Pool – The pool from which storage for the volume will be allocated.
10400277-004 07/2011
Replicant Information
8-25).
©2010-11 Overland Storage, Inc.
page.
"Target
8-68