Create Network Route; Specific Network Item Change Pages - Overland Storage SnapSAN S2000 User Manual

SnapSAN S2000 User Guide

Create Network Route

Use this page to create a new network route associated with an interface. The page is
accessed by clicking the Create Route action on the
Network routing tables are used to direct network traffic from a source to their
ultimate destination network. The common mechanism is to direct traffic via a
dedicated hardware router, which in turn knows where to forward the traffic.
Clicking a network interface name in the Content Area launches the
Interface Information
Information

Specific Network Item Change Pages

Use these pages to change these network names or server addresses. A subpage is
accessed by clicking the appropriate action item on the
• Change Hostname – launches the Edit Hostname page to enter or change the
name of the host.
• Change Domain – launches the Edit Domain page to enter or change the
domain name.
• Change SAN Name – launches the Edit SAN Name page to enter or change the
SAN Name used in searches.
• Change NTP Server – launches the Edit NTP Server page to enter or change
the NTP server address.
• Change iSNS Server – launches the Edit iSNS Server page to enter or change
the iSNS server address
• Change DNS Server – launches the Edit DNS Server page to enter or change
up to three DNS server addresses.
You can specify up to three DNS servers; however, this is not required if DHCP
is being used to provide addresses.
10400277-004 07/2011
page. Clicking a MAC address launches the
page.
©2010-11 Overland Storage, Inc.
Network Information page.
Network
Network Device
Network Information page:
8-21