Configuring The Appliance - Overland Storage SnapSAN S2000 User Manual

SnapSAN S2000 User Guide

Configuring the Appliance

To connect your web browser to the appliance, enter either the network name or the IP
address into your web browser. With some browsers, you may need to prefix the name
with "https://" (for example, "https://192.168.1.140"). When you configure the
appliance, you can change the network name to something more memorable if you
plan to use it for connection.
To configure your SnapSAN S2000 appliance using the Web Management Interface:
1. Open the Web Management Interface:
a. Enter the network name or IP address of the appliance into the browser
b. At the login dialog box, enter "admin" for the User Name and "password"
NOTE: You may see a warning saying the web site is not trusted and asking you to
2. At the License Agreement page, read the license agreement, check the
Agreement box to accept it, and click Next.
If you do not accept the license agreement, you will not be able to proceed.
10400277-004 07/2011
(with some browsers, you may need to preface the name with "http://").
for the Password (you can change this later), and click OK.
confirm whether you want to visit it. You can prevent this happening in future by
downloading the appliance's security certificate and installing it in your browser.
In order for your browser to trust the secure connection to your SnapSAN S2000
appliance permanently, the CA certificate must be installed in your browser. A
link to the certificate can be found on the System page
page 8-3).
Installation of the certificate varies according to the browser you are using. With
some browsers, you can simply click the certificate and it will be installed
automatically; on others, you may have to save the certificate and then import it
into the browser, for example, by dragging it to the browser. After installing the
certificate, some browsers may have to be restarted for the connection to
become trusted.
©2010-11 Overland Storage, Inc.
(see"System Tab" on
3-13