SnapSAN S2000 User Guide
• Target Name – Enter an alphanumeric name for the new mapped target.
• Initiator IQN – Enter the IQN of the initiator that will connect to the mapped
target or select one from the drop-down list.
• Authentication – You can configure the mapped target to allow initiators,
specified in the target's ACL, to connect without authentication or you can
specify that CHAP authentication must be used.
The Pool Information section lets you check that sufficient storage is available for the
mapped target.
When the mapped target has been created, the
showing the details of the new mapped target.
Edit Replicant ACL Entry
This page is used to edit a replicant ACL entry. It is accessed by clicking the Edit
Replicant ACL Entry action item on
Remove Replicant ACL Entry
This page is used to remove a replicant ACL entry. It is accessed by clicking the
Remove Replicant ACL Entry action item on
10400277-004 07/2011
Replicant ACL Entry
Replicant ACL Entry
©2010-11 Overland Storage, Inc.
Target Information
page is displayed,
page.
page.
8-73
Need help?
Do you have a question about the SnapSAN S2000 and is the answer not in the manual?