Overland Storage SnapSAN S2000 User Manual page 17

SnapSAN S2000 User Guide
The installation procedure automatically configures the Windows Firewall to allow
Windows SnapSAN Manager and its Appliance Discovery Service to access TCP and
UDP port 4309 on your computer. If you are using SnapServer Manager (SSM), it
configures access to TCP and UDP port 111.
IMPORTANT: If you are using another firewall, open the firewall manually to allow the
Appliance Discovery Service and the Windows SnapSAN Manager incoming and
outgoing access on this port. If your system is behind a NAT interface, you will have to set up
port forwarding to your computer for this port.
NOTE: To install the SnapSAN Manager Suite on a VMware vSphere Client, refer to
Follow the on-window instructions to install the software:
1. Download the appropriate version of the SnapSAN Manager.
Choose either the 32- or 64-bit version from:
http://docs.overlandstorage.com/snapsan
2. Double-click setup.exe.
3. At the start window, click Next.
10400277-004 07/2011
Appendix D, "VMware Plug-In."
©2010-11 Overland Storage, Inc.
3-2