System Power Settings; Set Admin Password - Overland Storage SnapSAN S2000 User Manual

SnapSAN S2000 User Guide
By clicking the Configure Monitoring action item on the
Information
can be changed to activate/deactivate the monitoring of a particular fan. By
selecting/deselecting the Hardware Monitoring Enabled checkbox at the top, fan
monitoring can be turned on/off for the entire appliance.
NOTE: The temperature sensors are always on and cannot be changed.

System Power Settings

This page lets you reboot or shutdown your system remotely. Selecting reboot will
cause the system to be safely shutdown and restarted in a controlled manner.
Selecting shutdown will cause the system to be safely shutdown, and powered off in a
controlled manner. It is accessed by clicking the Power Off action item on the
Information
CAUTION:
storage on the appliance before rebooting or shutting down the system.

Set Admin Password

Use this page to change your password. It is accessed by clicking the Set Admin
Password action item on the
NOTE: In order to change the admin password on the system you first need to enter the
10400277-004 07/2011
page, the fan speed monitoring becomes configurable and the checkboxes
page.
To prevent data loss, always verify that host systems are no longer using the
System Information
current system password followed by the new password. You are required to enter
the new password twice in order to ensure that it is spelled correctly.
©2010-11 Overland Storage, Inc.
Hardware Sensors
page.
System
8-7