Kaiser Belle Époque User Manual page 98

2
98
4
3
1
DIGITAL CLOCK TIMER OF THE OVENS
Avantgarde
PLUS
F12
sensor control
Demo mode
This is the mode of operation after an electric
supply break and also after the first turning-on.
The purpose of this mode is to show all
performance capabilities of the electronic control
with the help of a registered sequence of orders.
In this mode of operation the oven is not really
operated, i.e. no heating element is switched on.
The control panel is not active and the oven
doesn't respond from there at the orders.
To deactivate the demonstration mode, touch
during 5 seconds the key 1 up to a confirming
sound signal. The electronic control passes into
the normal operation mode.
Setting the clock
To set the current time:
Press key 2 and 3 at the same time.
•
With this setting a flashing colon 4 appears
showing you are in clock setting mode.
By pressing the choice keys 2 or 3 you can
•
set the time.
After a few seconds the controller sets the time
currently displayed and the two dots stop flashing.
Important! If you change the time setting,
you reset the timer and cancel all cooking
settings.
EN
with full
BITURBO