3
154
CARE AND ATTENDANCE
IMPORTANT!!! As a safety precaution, before
care and attendance of
disconnect the plug from the power socket or the
power cable from the oven.
1
Replacement the oven light
The oven light 1 must have these precise features:
a) temperature resistance up to 300 °C.
b) power supply: see V/Hz indicated on data plate.
c) power 25W
d) E 14 connection.
Replacement of a halogen bulb
2
EN
Attention! First of all disconnect the apparat
from the power supply.
•
To prevent damage, place a tea cloth in the
oven
•
Unscrew the glass cover of the light
•
Unscrew the old light bulb and replace it
with the new one
•
Put back the glass cover and remove the
tea cloth
•
Connect
the
appliance
electricity supply
•
Take out of the oven the backing trays, the
tracks and a catalytic panel from the
necessary wall,
Extract the the protecting glass 2 using a
•
flat tool or screwdriver and, holding it,
remove to the outside.
Replace the bulb 3 (230 V, 40 W) using a
•
piece of cloth or paper for that purpose,
Attention! Make sure that you do not touch
the halogen bulb to be installed with your
bare fingers!
•
Then reinstall the protecting glass 2, a
catalytic panel then the tracks and the
backing trays in reverse order.
•
Connect
the
appliance
electricity supply.
the oven, always
to
the
main
to
the
main