Removing The Transfer Unit; Installing A Transfer Unit - Fuji Xerox DocuPrint P365 d User Manual

2
Remove the packing material from the fusing unit.
3
Insert the fusing unit into the printer until it clicks.
NOTE:
•
Hold both sides of the fusing unit with your hands.
•
Make sure that the fusing unit is firmly set in the slots and cannot be moved easily.
4
Lower the two gray levers to lock the fusing unit.
NOTE:
•
After replacing the fusing unit, initialize its life counter. For details, see

Removing the Transfer Unit

1
Push the tabs on both sides of the transfer unit inward, and then lift it out of the printer.

Installing a Transfer Unit

1
Unpack a new transfer unit.
194
Maintenance
"Resetting the Counter of the Fusing Unit" on page 197.