Auto Reset; Clock Settings - Fuji Xerox DocuPrint P365 d User Manual

• Auto Reset

Purpose:
To automatically reset the settings to the default settings and return to the standby mode after you do not specify any
settings for the specified time.
Values:
*
45sec
1min
2min
3min
4min
• Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is cancelled if
the time-out time is exceeded.
Values:
Off
*
On 60sec
3–300 sec
• Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the
time-out time is exceeded.
Values:
Off
*
On 30sec
5–300 sec

• Clock Settings

Purpose:
To specify the date and time formats.
Values:
Set Date & Time
Date Format
Time Format
*1 The default for Date Format varies depending on region-specific factory default.
Disables the fault time-out.
*
Sets the amount of time the printer waits before canceling a job that
stops abnormally.
Disables the job time-out.
*
Sets the time the printer waits for data to arrive from the computer.
Time Zone Sets the time zone.
Sets the date depending on the Date Format settings.
Set Date
Set Time Sets the time.
yy/mm/dd Sets the date format.
mm/dd/yy
*1
dd/mm/yy
12H Sets the time in 12-hour format.
*
24H Sets the time in 24-hour format.
Using the Operator Panel Menus
121