DocuPrint P385 dw/DocuPrint P375 dw/DocuPrint P375 d
Quick Setup Guide
D016HT001-01
971E 00561 MB3653E2-2 (Edition 1)
February 2020
Unpack the machine and check the components
1
Remove the packing materials and install the drum cartridge and toner cartridge assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
4
Select your language (if needed)
1.
Press ▼ or ▲ to select [General Setup], and
then press OK.
2.
Press OK to select [Local Language].
3.
Press ▼ or ▲ to select your language, and then
press OK.
4.
Press Cancel.
Drum Cartridge and
Starter Toner Cartridge
Fuji Xerox Installation Disc
Discard the silica gel pack.
Adjust the paper
guides.
Front
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Quick Setup Guide
Safety Guide
AC Power Cord
Not all models are available in all countries.
NOTE:
• The components included in the box may differ depending on your country.
• The available connection interfaces vary depending on the model.
• You must purchase the correct interface cable for the interface you want to
use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The illustrations in this Quick Setup Guide show the DocuPrint P375 dw.
Remove the orange part.
Need help?
Do you have a question about the DocuPrint P385 dw and is the answer not in the manual?
Questions and answers