SMC Networks HRS012-A Operation Manual page 64

HRX-OM-M091
Chapter 5 Simple communication protocol function
Response delay time (simple communication protocol)
21.
Press the [SEL] key once.
The set screen of response delay time (simple communication protocol) is displayed on the
digital display.
PV
SV
22.
Select response delay time (simple communication protocol) from the table below with [▲]
key or [▼] key, and confirm by pressing "SEL".
Set values
to
Communication range (simple communication protocol) Setting and checking
23.
Press the [SEL] key once.
The set screen of communication range (simple communication protocol) is displayed on
the digital display.
PV
SV
24.
Select communication range (simple communication protocol) from the table below with [▲]
key or [▼] key, and confirm by pressing "SEL".
Set values
5.3 Setting and checking
5-10
Table 5.3-12 List of set values
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
Sets of response delay time
Set range is 0 to 250m sec.
Table 5.3-13 List of set values
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
Only reading is available
Reading and writing are available
Setting and checking
(Default setting)
is simple
(Default setting)
is simple
Initial value
Initial value
○
HRS Series