SMC Networks HRS012-A Operation Manual page 61

Slave addresses（simple communication protocol） Setting and checking
9.
Press the [SEL] key 3 times.
The set screen of slave addresses (simple communication protocol) is displayed on the
digital display.
PV
SV
10.
Select slave addresses (simple communication protocol) from the table below with [▲] key
or [▼] key, and confirm by pressing "SEL".
Set values
to
Communication speed (simple communication protocol)
11.
Press the [SEL] key once.
The set screen of communication speed (simple communication protocol) is displayed on
the digital display.
PV
SV
12.
Select communication speed (simple communication protocol) from the table below with
[▲] key or [▼] key, and confirm by pressing "SEL".
Set values
HRS Series
Table 5.3-6 List of set values
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
Sets of slave addresses
communication protocol.
Set range is 1 to 99.
Table 5.3-7 List of set values
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
1200bps
2400bps
4800bps
9600bps
19200bps
Chapter 5 Simple communication protocol function
is simple
for simple
Setting and checking
is simple
HRX-OM-M091
Initial value
(Default setting)
Initial value
(Default setting)
○
5.3 Setting and checking
5-7