SMC Networks HRS012-A Operation Manual page 38

HRX-OM-M091
Chapter 4 MODBUS communication function
Slave addresses（MODBUS）Setting and checking
9.
Press the [SEL] key once.
The set screen of slave addresses (MODBUS) is displayed on the digital display.
PV
SV
10.
Select slave addresses (MODBUS) from the table below with [▲] key or [▼] key, and
confirm by pressing "SEL".
Set values
to
Communication speed（MODBUS）Setting and checking
11.
Press the [SEL] key once.
The set screen of communication speed (MODBUS) is displayed on the digital display.
PV
SV
12.
Select communication speed (MODBUS) from the table below with [▲] key or [▼] key, and
confirm by pressing "SEL".
Set values
4.3 Setting and checking
4-6
Table 4.3-6 List of set values
Explanation
Setting/checking are not available unless the
serial protocol setting is MODBUS.
Sets of slave addresses for MODBUS.
Set range is 1 to 99.
Table 4.3-7 List of set values
Explanation
Setting/checking are not available unless the
serial protocol setting is MODBUS.
9600bps
19200bps
Initial value
(Default setting)
Initial value
(Default setting)
○
HRS Series