SMC Networks HRS012-A Operation Manual page 19

Contact input signal 2 delay timer of reading Setting and checking
15.
Press the [SEL] key once.
The set screen of contact input signal 2 delay timer of reading is displayed on the digital
display.
PV
SV
16.
Select contact input signal 2 delay timer of reading from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set values
to
Contact input signal 2 OFF detection timer Setting and checking
17.
Press the [SEL] key once.
The set screen of contact input signal 2 OFF detection timer is displayed on the digital
display.
PV
SV
18.
Select contact input signal 2 OFF detection timer from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set values
to
HRS Series
Table 2.4-9 List of set values
Explanation
Setting of contact input signal 2 delay timer
of reading.
Set range is 0 to 300 sec.
Table 2.4-10 List of set values
Explanation
Setting and checking are not available unless
contact input singal 2 is external switch signal
input(N.O. type or N.C. type).
Setting of contact input signal 2 OFF
detection timer.
Set range is 0 to 10 sec.
Chapter 2 Contact input/output communication
Initial value
(Default setting)
Initial value
(Default setting)
HRX-OM-M091
2.4 Setting and checking
2-9