SMC Networks HRS012-A Operation Manual page 62

HRX-OM-M091
Chapter 5 Simple communication protocol function
BCC（simple communication protocol） Setting and checking
13.
Press the [SEL] key once.
The set screen of BCC (simple communication protocol) is displayed on the digital display.
PV
SV
14.
Select BCC (simple communication protocol) from the table below with [▲] key or [▼] key,
and confirm by pressing "SEL".
Set values
Data length (simple communication protocol) Setting and checking
15.
Press the [SEL] key once.
The set screen of data length (simple communication protocol) is displayed on the digital
display.
PV
SV
16.
Select data length (simple communication protocol) from the table below with [▲] key or
[▼] key, and confirm by pressing "SEL".
Set values
5.3 Setting and checking
5-8
Table 5.3-8 List of set values
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
Without BCC
With BCC
Table 5.3-9 List of set values
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
7 bit
8 bit
Initial value
(Default setting)
is simple
Initial value
(Default setting)
is simple
○
○
HRS Series