Hydraulic Hose And Fitting Torque Specifications - Genie TMZ-34/19 Service Manual

Section 2 • Specifications
800-610-4101
ActionRental.com
SPECIFICATIONS
Hydraulic Hose and Fitting
Torque Specifications
Your machine is equipped with Parker Seal-Lok
fittings and hose ends. Genie specifications require
that fittings and hose ends be torqued to
specification when they are removed and installed
or when new hoses or fittings are installed.
SAE O-ring Boss Port
(tube fitting - installed into Aluminum)
SAE Dash size
-4
-6
-8
-10
-12
-16
-20
-24
SAE O-ring Boss Port
(tube fitting - installed into Steel)
SAE Dash size
-4
-6
-8
-10
-12
-16
-20
-24
2 - 4
Seal-Lok® fittings
1 Replace the O-ring. The O-ring must be
®
Torque
11 ft-lbs / 14.9 Nm
2 Lubricate the O-ring before installation.
23 ft-lbs / 31.2 Nm
3 Be sure that the face seal O-ring is seated and
40 ft-lbs / 54.2 Nm
4 Position the tube and nut squarely on the face
69 ft-lbs / 93.6 Nm
93 ft-lbs / 126.1 Nm
5 Tighten the nut or fitting to the appropriate
139 ft-lbs / 188.5 Nm
172 ft-lbs / 233.2 Nm
6 Operate all machine functions and inspect the
208 ft-lbs / 282 Nm
Torque SAE Dash size
16 ft-lbs / 21.7 Nm
35 ft-lbs / 47.5 Nm
60 ft-lbs / 81.3 Nm
105 ft-lbs / 142.4 Nm
140 ft-lbs / 190 Nm
210 ft-lbs / 284.7 Nm
260 ft-lbs / 352.5 Nm
315 ft-lbs / 427.1 Nm
TMZ-34/19
replaced anytime the seal has been broken.
The O-ring cannot be re-used if the fitting or
hose end has been tightened beyond finger
tight.
The O-rings used in the Parker
Seal Lok® fittings and hose ends
are custom-size O-rings. They are
not standard SAE size O-rings.
They are available in the O-ring
field service kit (Genie part
number 49612).
retained properly.
seal end of the fitting and tighten the nut finger
tight.
torque per given size as shown in the table.
hoses and fittings and related components to
confirm that there are no leaks.
Seal-Lok Fittings
®
(hose end)
-4
-6
-8
-10
-12
-16
-20
-24
June 2005
REV C
Torque
18 ft-lbs / 24.4 Nm
27 ft-lbs / 36.6 Nm
40 ft-lbs / 54.2 Nm
63 ft-lbs / 85.4 Nm
90 ft-lbs / 122 Nm
120 ft-lbs / 162.7 Nm
140 ft-lbs / 190 Nm
165 ft-lbs / 223.7 Nm
Part No. 52075