Datamax I-class series Operator's Manual page 52

Communications (continued)
Menu Item
MAX LENGTH COMMAND
ENABLED
DISABLED
OPTION FEEDBACK
DISABLED
SCANNER
RFID HEX
RFID ASCII
PROCESS SOH (DATA)
DISABLED
ENABLED
Determines how a host software Maximum Label
Length (<STX>M) command is handled, where:
Processes commands normally.
Controls the setting via the menu; see Section 4.2.2.
Allows feedback characters from an optional device to
be returned to the host device, in the format of
<A;B;C;D;E;F>[CR], where:
A - Is the device type: R = RFID; and, S = Linear Scanner
B - Is the status: C = entire label complete; F = faulted
(failed) label; and, U = unknown
C - Is the number of expected reads, given in two
characters.
D - Is the number of good reads, given in two characters.
E - Is the internal Job and Sub Job Identifier, given in four
characters each.
F - Is the data read, delimited with semicolons (;) if multiple
reads.
Reports no data.
Reports Linear Scanner data.
Reports RFID data in hexadecimal format.
Reports RFID data in an ASCII format.
Determines the response to an Immediate Command
(e.g., Get Status, Module Storage, etc.), where:
Processes commands normally.
Interrupts operations upon SOH receipt to process the
command.
Details
I-Class