Datamax I-class series Operator's Manual page 26

4.2.3 Print Control
The Print Control menu contains print quality, throughput, formatting, and custom setup
functions:
Menu Item
HEAT
(0 - 30)
10
PRINT SPEED
(X - XX)
XXin/sec
FEED SPEED
(X - XX)
XXin/sec
REVERSE SPEED
(X - XX)
XXin/sec
SLEW SPEED
(X - XX)
XXin/sec
ROW OFFSET
00.00in (0 - 99.99)
COLUMN OFFSET
00.00 in (0 - 99.99)
Controls the burn-time of the printhead (selectable as
"Heat" in most labeling programs), where:
Is the number based on duration, corresponding to
print darkness.
Controls the rate of label movement during printing,
where:
Is the speed setting; see Appendix A for the model
dependant default and range.
Note: Detailed image printing may require slower

speeds; alternately, faster printing may
require an increased HEAT setting for
sufficient energy transfer.
Controls the rate of label movement between printing
areas, where:
Is the speed setting; see Appendix A for the model
dependant default and range.
Controls the rate of label movement during backup
positioning, where:
Is the speed setting; see Appendix A for the default
and range.
Controls the rate of label movement between printing
areas when using the GPIO option, where:
Is the speed setting; see Appendix A for the default
and range.
Shifts the vertical SOP position on the label, where:
Is the offset distance; see Section 7.2.2 for label
details.
Shifts the horizontal, left-justified SOP position to the
right without shifting the Label Width termination point
to the right, where:
Is the offset distance; see Section 7.2.2 for label
details.
Details
I-Class