Datamax I-class series Operator's Manual page 41

System Settings (continued)
Menu Item
AUTO
COLUMN EMULATION
XXX DOTS (XXX - XXX)
ROW EMULATION
XXX DOTS (XXX - XXX)
SOP EMULATION
DISABLED
110 (PRODPLUS)
220 (ALLEGRO)
250 (PRODIGY)
BACK AFTER PRINT
I-Class
Identifies then activates the appropriate emulation
parser for the data.
Note: Correct identification can be dependant upon

the HOST SETTINGS / HOST TIMEOUT (see
Section 4.2.6).
may, in some cases, render the data
unrecognizable, thus requiring manual
selection of the mode.
Allows the column dot count to be adjusted, where:
Selects the number of dots per inch (or mm) in which
to print the format, reducing it from right to left; see
Appendix B for range and Section 7.1 for dot size.
Note: No adjustment occurs at the default setting.

Allows the row dot count to be adjusted, where:
Selects the number of dots per inch (or mm) in which
to print the format, reducing or enlarging it from top to
bottom; see Appendix B for range and Section 7.1 for
dot size.
 Note: No adjustment occurs at the default setting.
Allows SOP functions with backward compatibility when
printing legacy model label formats, where:
Note: The printer may automatically feed labels to

setup the print position.
Uses the normal position.
Emulates the Prodigy Plus
®
Emulates the Allegro
™
Emulates the Prodigy
Determines label movement timing when a cutter,
present sensor, peel and present, or GPIO option is
enabled, where:
Details
Also, extraneous characters
®
position.
position.
position.