Datamax I-class series Operator's Manual page 39

System Settings (continued)
Menu Item
UNLOCK FEATURE
0 0 0 0 0 0
SET FACTORY DEFAULTS
SET FACTORY DEFAULT?
CANCEL KEY = YES
FORMAT ATTRIBUTES
XOR
OPAQUE
TRANSPARENT
LABEL ROTATION
DISABLED
ENABLED
IMAGING MODE
MULTIPLE LABEL
SINGLE LABEL
PAUSE MODE
DISABLED
ENABLED
I-Class
Unlocks a corresponding feature with the entry of the
correct code.
Returns the printer settings to the factory-programmed
values or the Factory Setting File values, where:
Overwrites the current configuration and restores the
default configuration (), or if selected the Factory
Setting File. Otherwise, press the ESC Key to keep the
current configuration.
Note: A reset will occur and, if no Factory Setting

File is used, all settings returned except
CUSTOM ADJUSTMENTS and calibrations.
Defines the way overlapping text, bar codes, and
graphics are printed, where:
Does not print intersecting areas, for
example:
Overwrites intersecting areas with
those last formatted, for example:
Prints intersecting areas, for
example:
Allows the label format to be rotated 180 degrees,
where:
Prints formats without rotation.
Prints flipped formats.
Determines the process used to format labels, where:
Formats multiple images, as memory permits, to
achieve the fastest throughput.
Note: Time stamps will indicate the moment of

imaging rather than printing.
Formats an image only after a previous format has been
printed to achieve the most accurate time stamps.
Allows controlled interactive printing, where:
Prints labels without pausing.
Requires the user to press the PAUSE Key to print each
label.
Details